W2W Reverse Osmosis Tanks

Water2water sells a wide range of pressurised water tanks for collecting and storing RO-filtered water.

RO water tank capacity ranges from smaller domestic-sized tanks to large industrial tanks and are made from coated steel or plastic.

The bladders inside pressurised reverse osmosis water storage tanks are made from Butyl which is a food-grade, impermeable rubber.

Please note the tank size represents the physical size and the amount of water it holds will be less due to the bladder and water pressure. All measurements are approximate.

You need to choose the right size Reverse Osmosis pressurised tank to meet the filtered water production rate of your domestic, commercial or industrial RO system.

A larger tank will not increase the speed of water production for your chosen RO system.

Bear in mind the Reverse Osmosis pressurised tank size represents the actual physical dimension of the tank and not the amount of water it holds, which will be lower.

If the tank will be located more than a few feet from the RO system, you may need an additional pump to maintain water pressure.

Automatic shut-off valves prevent your tank from over-filling.

As you use water from the tank, the air pressure inside will go down and the valve will re-open to allow more filtered water to enter.